Telescopic and foldable truss receiver with a nylon centering tip for easy insertion into the truss.
Pin with locking mechanism to secure the truss receiver at the desired height.
Hinged element for folding the truss receivers – space-saving and stackable dolly design.
Removable stacking Tube, secured with Safety Pin B – Tube: Ø30 × 3 × 205 mm.
Adapter for stacking the dolly onto a PreRig truss.
Material: Nylon
Mounting screw: Cylinder head M10 × 70
Blickle SoftMotion Wheel, soft rubber, 80 mm.
Screw M8 × 30 mm (4 pieces per wheel).
Resting surface for foldable truss receivers; aluminum square tube 50 × 50 × 3 mm with plastic cap.
Cylinder head screw M10x70, grade 8.8
Male/female fork connector; rotatable and interchangeable due to dual-screw mounting. Alternative: Screw connector for rotating outwards, allowing construction of both horizontal and vertical angles – separate static calculations required!
Receiver socket for the dolly. The dolly’s truss receiver is inserted from below into this socket and secured with Safety Pin A.
Additional stacking adapters can be mounted and secured on top, allowing another dolly to be stacked (stacking extension – coming soon).
Two screws for securing the connectors – M12 × 70 mm; Grade 12.9.
The main load-bearing tube (chord tube) with a 48 mm diameter and 4.5 mm wall thickness is used to carry the load.
The gate allows opening the end frame to make it easier to insert devices into the truss and, if necessary, attach LED walls.
The aluminum tube is equipped with two female fork connectors and can be mounted to the receiver sleeve’s base plate using two PR pins.
Truss connection bolt with centering tip.
Material: 42CrMo
Safety clip: R3
Securely connects the dolly to the PreRig truss.